Home > 18 SOUND > 18 Sound Pro Audio Speakers > 5"- 6" Speakers >

18 SOUND 6NMB420
18 Sound 6NMB420 6" mid-bass speaker
 
Our Price: $199.99

Quantity in Stock:(Out of Stock)

Free Shipping
Availability:: Usually Ships in 24 to 48 Hours
Product Code: 18-SOUND-6NMB420
Qty:

Description
 

18 Sound 6NMB420 6" Neodymium High-Output Mid-Bass Speaker

Size: 6"
Power Rating: 200W AES
Frequency Response: 200-7kHz
Sensitivity: 100db
Impedance: 8 ohms
Voice Coil: 1.75"
Resonant Frequency: 120 Hz
Weight: 4 lbs.

The 6NMB420 is a 44mm voice coil 6.5 inch neodymium midbass transducer designed for mid low frequency reproduction in system designs where high intelligibility is required. When compared to our 6ND410 state-of-the-art midrange transducer, 6NMB420 offers a lower frequency resonance and a longer linear Xmax value.

As a result the speaker shows an increased output around 250Hz, with a consequent slightly reduced output above 700Hz. It is suitable as mid-bass in line array systems or multiple way systems with high-pass crossover above 200 Hz and low-pass up to 3kHz; enclosure might be closed or vented with volume size starting from 2 lit.

The speaker offers a superb linearity: distortion values are furtherly minimized by new enhanced design criterias, developed by Eighteen Sound engineers, taking the 6NMB420 to very high level of performance. The extremely powerful external neodymium magnet assembly assures high flux concentration, low power compression and excellent heat exchange.

The levels of force factor and power handling are, as a consequence, at the upper professional level with best power to weight ratio. A consistent heat transfer is guaranteed by the encapsulation of the magnetic structure in the interior of the basket, offering a largecontact space between the back plate and the dissipating structure. Particular efforts were dedicated to the surround shape and material design in order to minimize the resonances on mid range frequencies.

The triple roll design offers a consistent damping to typical bell modes. The 44 mm voice coil is made of light-weight aluminum wire and assures linearity and high power handling. The ability to perform in humid environments is a key feature of the 6NMB420: this is achieved through a proprietary humidity repellent cone treatment

More information here.

Share your knowledge of this product. Be the first to write a review »